FDI is committed to providing the best support possible for it's products.  If there is an answer that you cannot find or if you have additional questions, you can send an email to .  We will respond directly to your inquiry as quickly as possible.

Touch Screen FAQs

1. Can I debug the board using ULINK2 debugger as it is mentioned as "Mini-JTAG Debug Connector" in the page?
2. As the LPC3250 chip does not have internal flash how could I debug using a debugger and how to load the code into the external flash provided in the board?
3. I need to integrate a TFT LCD with touch screen in my project is it possible for you to support for hardware, schematics and sample codes for the same?
4. On purchase of the SOMDIMM-LPC3250, what kind support I can expect from you for my further development? Such as Errata sheets, Application notes, Sample codes, Schematics, etc...
5. The web site list "Segger JTAG Debugger with cables.  Is this included in the kit?
6. Can't get the Segger JTAG connected to the SOMDIMM-LPC2478 Module.
7. I accidently lost SIBL on the LPC3250 and need to get it back.
8. Do you have an adapter to convert from the standard 20 Pin 0.1' JTAG header to the 10 Pin header on the DIMM Modules?
9. What are the Current Measurements for the SOMDIMM Modules?
10. Do you supply all the source code about the software?
11. Do you need strictly to use the FreeRTOS or it is possible to have C-examples without an OS?
12. What kind of Graphical Libraries do you supply in order to manage the TFT? Are they supplied as open source code?
13. Do you supply the source code about the USB management as Host? If yes, are you able to manage FAT32-File System and extended file names?
14. Can I use the uEZ with the IAR compiler?
15. I suspect the software is configured for the 5.7" display and I have the 3.5" display. Can someone tell me how to change the settings so the 3.5" display will work?
16. How to change the settings so the 5.7" Okaya VGA display will work?