|
|
Embedded Development Products
FDI has developed family of Embedded
Development support products for microcontrollers from NXP
(founded by Philips)
and other vendors.
|
Top View
|
- SAB-TFBGAxxx Family REQUIRES Future Designs' USB-In-Circuit Programmer for
NXP LPC2K
-
FDI P/N: USB-ICP-LPC2K
- Connects directly to the USB-ICP-LPC2K via simple RJ45 Ethernet-style cable
-
Includes: Socket Adapter Board, Power Supply and Cable
|
- Program devices outside of the user's target board
-
Program devices before prototype boards are available
- Prototype
with fine pitch parts in TFBGA packages
- On board LED for testing
|
| |
The USB-Dongle and Derivative Board Family
provides a low cost and easy to use demo
platform for many popular NXP microcontrollers. |
|
USB-Dongle and Derivative Board Family
|
|
|
|
 |
- Embedded Linux Development Environment preloaded with:
-
Linux Kernel -
Hardware Drivers - Supports popular mobile
technologies
-
802.11b/g WiFi
-
Bluetooth
-
Audio Codec
-
SD Card Slot
-
USB 2.0 OTG
|
|
Front View
|
Rear View
|
- Single chip solution for LCD User Interface
- ARM7TDMI-S
Microcontroller
- 8-character alphanumeric LCD
- 512kB Internal
Programmable Flash Memory, 40kB RAM
- Hi-Speed USB 2.0 Device
|
-
Integrated I²C based LCD driver with 128 segment support
-
Powered by 5V Supply from PC USB Port
-
Two miniature push-buttons for user control
- Reprogrammable by
user through USB
- Multiple I/O ports available via optional 20-pin
expansion header
|
|
Front View |
Rear View
|
|
|
- 8-character alphanumeric LCD
- Powered by a single 3V coin cell battery
- Two miniature push-buttons for user control
- Reprogrammable by the user via 10-pin ICP header
|
|
Front View |
Rear View
|
-
Single chip solution for LCD User Interface with LPC9408
- Single Board Computer with multiple I/O options available via 12-pin header
- 8KB Internal Flash memory, 512 bytes RAM
- 8-character alphanumeric LCD
|
-
Integrated I2C based LCD driver with 128 segment support
-
Powered by a single 3V coin cell battery
- Two miniature push-buttons for user control
- Reprogrammable by the user via 10-pin ICP header
|
|
Front View
|
Rear View
|
- Low power, SPI based Real Time Clock driven by a 32.768 KHz
quartz crystal
- Flexible PCB layout supports two RTC package
options:
-
14-pin TSSOP for PCF2124 -
10-pin HVSON for PCA2125
|
- Powered by a single 3V
coin cell battery
- 8-character alphanumeric LCD
-
I²C based LCD driver with 128 segment support
-
Two miniature push-buttons for user control; additional User
Interface via header
- User reprogrammable via 10-pin ICP header
|
- USB-ICP-SAB9 - Socket
Adapter Board for USB-ICP-LPC9xx Driver
|
Top View |
- USB-ICP-SAB9 REQUIRES the USB
In-Circuit Programmer for
NXP LPC9xx
(FDI P/N: USB-ICP-LPC9xx) -
Plugs directly into the USB-ICP-LPC9xx
- Program devices outside of the
user's target board
-
Program devices before prototype boards are available
- Prototype with
fine pitch parts like HVSON10 & HQVFN28
- On board LED for testing
|
|
Front View |
Rear View
|
- 1 MHz and 30mA output allows faster data updates and / or more
capacitive busses
- 4 Individually controlled 25mA open drain or push-pull outputs OFF,
ON, DIM, or
DIM with Global Control for LED
dimming / blinking
- /OE input pin also allows hardware dimming / blinking
|
- Up to 7 address pins allows 128
I²C addresses
- 4 software programmable
I²C addresses allows controlling groups of
devices with single software command sequence
- If the battery is low, the red LED will flash every 3 seconds as a
warning
|
PC-Products
FDI has developed family
of PC based support products for the
I2C bus and also for ISP (In System Programming) of
Flash based microcontrollers from
NXP (founded by
Philips) and other vendors.
|
Bottom View |
Rear View
|
|
Bottom View |
Rear View
|
-
Supports NXP P89C51 Flash family
of microcontrollers
-
USB port power so no external
power supply required
-
Supports USB 1.1 to 2.0
-
Plugs directly into any standard USB port
- great for laptops
-
Works with NXP free Flash
Magic software that can be downloaded from the web
|
|
|
Bottom View |
Rear View
|
-
Supports
ALL NXP ARM 7 LPC2K family of microcontrollers that utilize ISP
Programming
-
USB port power so no external
power supply required
-
Supports USB 1.1 to 2.0
-
Plugs directly into any standard USB port
- great for laptops
-
Works with NXP free Flash
Magic software that can be downloaded from the web
|
|
|
Front View
|
Rear View
|
-
Quick Start kit for any I2C or MDIO Design
Less than 10 minutes to: Load the software Plug in the cable -
Start communicating -
Low voltage I2C support
100kHz and 400kHz I2C support MDIO Clause 22 and Clause 45 -
1MHz to 5MHz MDIO support
|
|
I2C
Software Developer Kit
- Lets the user write programs to control PC-I2C
directly
- Includes software DLL for custom user
applications
- Available Now
- Includes complete PC-I2C-KIT
-
Order Now!
XTEND Family
The XTEND, XA Trainer
and Expandable Narrative Design, is designed to
provide the user with a low cost, stable hardware and software
platform for application development with the 16-bit XA
microcontroller family. In many cases the XTEND may serve as a quick
prototype for the actual user application. With the XTEND, the user
can quickly and easily get a new design running with the XA
Microcontroller.
A version of the XTEND is
available to support each of the current XA derivatives including
the
XA-G3,
XA-G49, XA-S3 and XA-SCC.
|
