XTEND-Sxx Monitor Files

TASKING Crossview Pro ROM Monitor/Debugger for XTEND-Sxx

• Current version of the TASKING Crossview Pro ROM Monitor/Debugger for the XTEND-Sxx (PCB Rev B). 
  
  This file needs to be programmed into either the external FLASH or into the internal code space of the XA-S3.  In order to utilize the TASKING Crossview Pro ROM Monitor/Debugger, the TASKING EDE Tools are required.

XTEND-S3 Resource Utilization for the XVW Rom Monitor

• Timer 2 for baud rate generation
• Serial Port 1 for debug port
• Serial Port 1 Rx and Tx interrupts and vectors
• Break and Trace interrupts and vectors
• Port Pin P4.4 for LED control
• 4k of internal code space (0000-0FFF)
• 120H bytes of external code space (8000-811F for vector table)
• 5 bytes of external code space (FFFA-FFFF)
• 12 bytes of internal data space (0000-000B)
• Start stacking at 1000H
• External Data Addresses FFC000, FF8000, FF8002

Raisonance MonXA ROM Monitor/Debugger

• Current version of the Raisonance MonXA ROM Monitor/Debugger for the XTEND-Sxx (PCB Rev B). 
  
  This file needs to be programmed into the external FLASH.  In order to utilize the Raisonance MonXA ROM Monitor/Debugger, the Ride IDE Tools are required.