3.5″ Resistive Touch Screen LCD GUI (Production Module) – UEZGUI-RX62N-35QT-BA
Part #: UEZGUI-RX62N-35QT-BA (Production Module)
MSRP (Qty Volume): <$70.00
Part #: UEZGUI-RX62N-35QT (Dev Kit)
MSRP (Qty 1): $199.00
Status: In Production
Production guaranteed: Until 2029
Warranty: 1 Year (Extended available)
- Microcontroller-based intelligent HMI GUI
- 3.5" QVGA Resistive Touch Screen LCD
- µEZ® / FreeRTOS Rapid Software Development Platform
- Renesas RX62N 100MHz 165 DMIPS MCU with 512KB Internal Flash
- 2MB SDRAM
- Expansion: UART, I²C, SPI, ADC, GPIO, USB Host/Device, RMII
The 3.5″ Resistive Touch Screen LCD GUI (Production Module) – UEZGUI-RX62N-35QT-BA is designed to be used as an “off-the-shelf” Graphical User Interface (GUI) or Human Machine Interface (HMI) in a variety of end customer applications. The miniature, self-contained design is well suited to be embedded directly into your product and FDI offers prepackaged versions for stand-alone use. FDI also offers low cost customization services for customer specific hardware, software or packaging applications at volumes of 500 units or more.
Quick Start DocumentationQuick Start Guide
- μEZ® / FreeRTOS Rapid Development Platform
- MicroSD card appears as a USB Flash Drive to the PC
- Rowley CrossWorks Compiler and Tool Suite
- Segger J-Link Lite JTAG for programming and debug
|• Internal SRAM||96KB|
|• Internal Flash||512KB|
|External Flash Type||N/A|
|External Flash Optional||N/A|
|128Mbit Serial PCM Memory, option||Not available|
|Non-volatile data storage standard||32KB Data Flash|
|Non-volatile data storage optional||None|
|SD Card Bus interface||SPI @ 15MHz|
|USB||USB Device Mini-B for Device Operation|
|Expansion - primary||50 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I²C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100|
|Expansion - additional||UART|
|JTAG||Mini-JTAG Debug Connector|
|RTC||Interal RX RTC|
|Operating Temperature:||-20° to 70° C|
|Storage Temperature:||-30° to 80° C|
|Power Input||USB Device Mini-B for power|
|Input Voltage:||+5 Volt DC|
|Power Consumption:||250 mA typ / 500 mA max|
|Overall Size||78.74 (W) x 77.47 (H) x 13.72 (D) mm|
|Mounting:||1/8" holes in 4 corners|
|Screen Size (diagonal)||3.5 inches|
|Display Technology||a-si TFT|
|Resolution||320 x 240 (QVGA)|
|Brightness||350 nits (typ)|
|Contrast Ratio||500 : 1 (typ)|
|Colors:||262K (18 bit)|
|Pixel Pitch||0.219 (W) x 0.219 (H)|
|Vertical Viewing Angle:||60/70° U/D|
|Horizontal Viewing Angle:||70/70° L/R|
|Touch Screen type||4-Wire Resistive|
|Active Area:||70.08(W) x 52.56(H)|
|Response Time:||25ms Tr/Tf (typ)|
|Backlight:||6 LEDs (1S x 6YP)|
|Backlight Life:||20K hours (typ)|
|Backlight Power Consumption:||384 mW (typ)|
Current Documentation – Rev 2.3
|UEZGUI-RX62N-35QT Quick Start Guide||Quick Start Guide||09/29/2016|
|Users Manual||User's Manual||01/12/2016|
|Interactive Online uEZ GUI API Library (By Doxygen)||Interactive Online uEZ GUI API Library (By Doxygen)||Online||03/29/2016|
|Converting Images from 24-bit to 16-bit for uEZ GUI||Document||06/07/2013|
|Software QuickStart Guide||Quick Start Guide||09/15/2014|
|Software User's Guide||User's Guide||09/15/2014|
|JTAG Programming uEZ GUIs||Engineering Guide||08/13/2015|
|JLINK-RX-AD Users Manual||User's Manual||01/15/2014|
|2D Models for UEZGUI-RX62N-35QT||Mechanical Models||zip||12/22/2011|
|3D & EASM Model Files (By Request Only)||Mechanical Models||zip||03/25/2012|
|Converting a PowerPoint Slideshow for use on uEZ GUI Products||Application Note||zip||10/19/2016|
|Expansion Board Design Guide||Application Note||11/03/2016|
|How to Create Videos for uEZ GUI||Engineering Guide||zip||02/22/2016|
|uEZGUI 3.5 Mainboard Schematics Rev 2.1||Schematic||12/05/2011|
|uEZGUI-RX62N-35QT-BA Schematics 1.1||Schematic||09/30/2011|
|uEZGUI-RX62N-35QT-BA Schematics 1.0||Schematic||08/09/2011|
|uEZGUI 3.5 Rev 2.2 ECO||Document||10/31/2012|
|uEZGUI 3.5 Rev 2.1 ECO||Document||11/22/2011|
|uEZGUI 3.5 Rev 2 ECO||Document||10/19/2011|
|uEZGUI 3.5 Rev 1.1 ECO||Document||09/14/2011|
|uEZGUI-RX62N-35QT 2.2 PCN||Document||10/31/2012|
|uEZGUI-RX62N-35QT 2.0 PCN||Document||10/19/2011|
|uEZGUI-RX62N-35QT 1.1 PCN||Document||09/14/2011|
μEZ® Source Files
µEZ® is an open source, embedded middleware platform providing underlying RTOS and processor abstraction features enhancing portability of application code to multiple ARM and Renesas platforms with high reusability.
The μEZ+ Bootloader is perfect for upgrading your firmware in the field through mediums such as an SD card,USB flash drive, or even over a serial interface such as Ethernet or USB.
Recommended 3rd Party Software
Rowley CrossWorks Compiler and Tool Suite
Crossworks compiler for ARM.
Developed in partnership with the world’s leading chip companies over a 12 year period, FreeRTOS is the market leading real time operating system (or RTOS), and the de-facto standard solution for microcontrollers and small microprocessors.
SAFERTOS is a safety certified Real Time Operating System (RTOS) for embedded processors. It delivers superior performance and pre-certified dependability, whilst utilizing minimal resources.
TouchGFX is a unique software framework that unlocks the graphical user interface (GUI) performance of your low-resource hardware. The revolutionizing technology breaks existing restraints, as it lets you create sophisticated GUIs that fully live up to today’s smartphone standards at a fraction of the cost.
emWin is designed to provide an efficient, processor- and LCD controller-independent graphical user interface (GUI) for any application that operates with a graphical LCD. It is compatible with single-task and multitask environments, with a proprietary operating system or with any commercial RTOS. emWin is shipped as “C” source code. It may be adapted to any size physical and virtual display with any LCD controller and CPU.
Micrium is a global RTOS leader and a top choice of embedded engineers building microprocessor, microcontroller, and DSP-based devices. Micrium’s commercial RTOS components such as the μC/OS product family are the preferred solution at thousands of companies around the globe. Offering unprecedented ease-of-use, μC/OS-III is delivered with complete 100% ANSI C source code and in-depth documentation. μC/OS-III runs on the largest number of processor architectures, with ports available for download from the Micrium Web site. µC/OS-III allows for unlimited tasks, semaphores, mutexes, event flags, message queues, timers and memory partitions. µC/OS-III provides features to allow stack growth of tasks to be monitored. µC/OS-III also supports an unlimited number of priority levels. µC/OS-III’s footprint can also be scaled to contain only the features required for a specific application.
Crank™ Software Inc. is an innovator in embedded user interface (UI) solutions. Compared to traditional electronic design automation tools, Crank’s products and services enable R&D teams to more quickly develop rich graphical displays—also called UIs or HMIs—for resource-constrained embedded devices. Applications include in-car graphical displays, animated GPS systems, and rich user interfaces on factory floors. Crank Software bridges the gap between UI design and embedded systems to deliver competitive advantage because streamlining the development lifecycle enables their customers to get products to market faster, with higher ROI and lower TCO, while delivering a superior customer experience. Crank Storyboard™ Designer enables user interface (UI) designers to easily prototype the look and feel of a product, and then deploy a production-ready interface directly to the embedded target. Designers maintain full control over the UI and user experience (UX) without having to perform a hand off to an embedded systems engineer for implementation.
J-Link Software Downloads
Various Various Download latest software and drivers from the Segger website.
J-Link Product Page
SEGGER J-Links are the most widely used line of debug probes available today. They’ve been proven for more than 10 years with over 250,000 units sold, including OEM versions and on-board solutions. This popularity stems from the unparalleled performance, extensive feature set, large number of supported CPUs, and compatibility with all popular development environments.
15FPS Video Demo
Demonstration of how uEZ Guy is able to provide fifteen frame per second video samples right on the device.
Gainspan WiFi PMOD demo
Demonstration of the additional WiFi capabilities of the μEZ GUI, shown by FDI Director Kent Lowman from the show floor of EE Live in San Jose, California.
FreeRTOS Presentation formatted for this μEZGUI (zip)
SAFERTOS Presentation formatted for this μEZGUI (zip)
Once you’ve picked up your µEZ GUI, FDI is with you every step of the way. We offer support and documentation on our forums.
- Sourceforge download link for µEZ Software
- Hello World emWin GUI Project Generator (Part of µEZ Source Files)
- Slide Show Creation Guide for μEZ GUI
- How to Create Videos for μEZ GUI
- µEZ+ Program
- µEZ+ Bootloader
Quick Start GUI Program
- Customer Provides Menu Inputs
- Photoshop, PowerPoint or even napkin drawings
- Simple Menus and Functions usually less than 8 screens
- 1-2 week turnaround for $5,000 or less
- Customer starts API level application development immediately
Do not forget to look at our expansion boards
Adds: Ethernet, USB Host, RS232/RS485, AC Power