USB In-Circuit Programmer for LPC9XX – USB-ICP-LPC9XX

USB-ICP supports the new In-Circuit Programming or ICP mode on NXP microcontroller families such as the LPC9XX. In-Circuit Programming uses a two-wire serial interface to program and erase ICP enabled microcontroller devices without removing them from the system.

Part #: USB-ICP-LPC9XX

Status: End of Life

  • Supports NXP P89C51 family of microcontrollers
  • USB port power so no external power supply required
  • Free NXP Flash Magic software available from NXP
  • Target Device Voltage range of 3.0 - 5.0V
  • Mini-ISP Cable provided

>> See the brochure
Overview
Overview

USB-ICP supports the new In-Circuit Programming or ICP mode on NXP microcontroller families such as the LPC9XX. In-Circuit Programming uses a two-wire serial interface to program and erase ICP enabled microcontroller devices without removing them from the system. The ICP function uses only five pins: VCC, GND, PCL, PDA, and RSTn. A small connector is all that is needed to interface your application to the USB-ICP programmer.

USB-ICP-80C51ISP Kit Contents
  • USB-ICP Dongle
  • 18″ cable allowing direct connection to the user’s application
  • ICP design guide for the user’s target board
Specifications
Specifications
  • Supports NXP P89LPC9xx family of microcontrollers
  • USB port power so no external power supply required
  • Supports USB 1.1 to 2.0
  • Plugs directly into any standard USB Port – great for laptops
  • Works with NXP free Flash Magic software that can be downloaded from the web
  • USB-ICP supports Target Device Voltage range of 3.0 – 3.3V
Documentation
Current Documentation

Download all current documentation (zip)

TitleTypeFormatDate 
BrochureBrochurepdf12/02/2013
Quick Start GuideQuick Start Guidepdf
Supported Device ListDocumentpdf09/06/2013
Cable Pinouts and Target Connector InformationDocumentpdf
Flash Magic Release NotesDocumenttxt
Windows 2000 Installation InstructionsDocumentpdf
In-Circuit Programming(ICP) SpecificationsDocumentpdf09/26/2005
Software
Software

TitleTypeFormatDate 
Software Tool to Identify USB-IPC Firmware VersionSoftwareexe
Windows 7 DriversDriverszip
USB-IPC v1.07 UpgradeSoftwarezip06/13/2008
Windows XP DriversDriverszip06/11/2004
Windows 2000Driverszip06/11/2004


Flash Magic 

Flash Magic is a PC tool for programming flash based microcontrollers from NXP using a serial or Ethernet protocol while in the target hardware.

Click here for Windows 7 drivers (Externally-hosted)
Up-to-date Windows 7 VCP drivers