(Huntsville, Alabama — April 15, 2010) Future Designs Inc. announces a major price reduction on the Socket Adapter Board (SAB) Family. These products have been reduced from 12% to 50% in price to help make them more affordable to customers!
The USB-ICP-SAB9 Socket Adapter Board extends the capability of our popular USB In-Circuit Programmer for NXP Semiconductors LPC9xx and LPC2xx devices to allow the user to program and test these devices outside of their application circuit.
The SAB9 includes support for most NXP LPC9xx devices in the following packages: TSSOP, HVSON10, HQVFN28, and DIP8 – DIP28. All signals from every socket (except PLC44) are brought out to two 14-pin, 100 mil headers. This enables the user to load any supported microcontroller into a socket and connect it to their application with a few jumper wires or to easily construct bread-board prototypes and connect them directly to the SAB9 as daughter cards. Another feature of the SAB9 is support for the 5V P89V52xxA. Even though the P89V52xxA is part of NXPs’ standard 80C51 family, it is the first 80C51 variant that shares the same ICP programming interface as the LPC9xx.
The SAB-TFBGAxxx Family includes support for most NXP LPC2xxx devices in the following packages: TFBGA100, TFBGA180 and TFBGA208. The SAB-TFBGAxxx can also be used for verification of basic functionality of the user software as the board may be used completely stand-alone. The board includes 12MHz oscillator circuit, power-on reset circuit, and a single LED connected to a user I/O signal.
More information on these products can be found on our website at https://www.teamfdi.com under “Products”.