µEZ GUI Selector Guide
| Part Number: | MSRP (QTY 1K) | Screen Size (diagonal) | Touchscreen type | Microcontroller | Speed | Internal SRAM | Internal Flash | External Flash | External Flash Type | External Flash Optional | SDRAM Standard | SDRAM Optional | 128Mbit Serial PCM Memory, option | Non-volatile data storage standard | Non-volatile data storage optional | SD Card Bus interface | USB | Expansion – primary | Expansion – additional | Accelerometer | Temperature Sensor | JTAG | RTC | Audio | Haptic | Ambient Light Sensor | Operating Temperature: | Storage Temperature: | Power Input | Input Voltage: | Power Consumption: | Overall Size | Resolution | Brightness | Contrast Ratio | Vertical Viewing Angle: | Horizontal Viewing Angle: | Backlight Life: | Backlight Power Consumption: | Production Status: | MSRP (QTY 1) | Display Manufacturer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| uEZGUI-1788-43WQT-BA | $125.00 | 4.3 inches | 2H from datasheet | NXP LPC1788 | 120MHz | 96KB | 512KB | 8MB | NOR | up to 32MB | 8MB | up to 32MB | Not available | Internal 4K EEPROM | External 8KB EEPROM | SPI @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connector for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-AB for power | +5 Volt DC | 350 mA typ / 500mA max | 116.84 (W) x 72.14 (H) x 11.85 (D) mm | 480 x 272 (WQVGA) | 360 nits (typ) | 500 : 1 (typ) | 55/80 ¡ U/D | 80/80 ¡ L/R | 9 LEDs (9S x 1P) | 10K hrs (min) | In Production | $199.00 | |
| uEZGUI-RX62N-35QT-BA | $88.00 | 3.5 inches | 4-Wire Resistive | Renesas RX62N | 100MHz | 96KB | 512KB | N/A | N/A | N/A | 2MB | N/A | Not available | 32KB Data Flash | None | SPI @ 15MHz | USB Device Mini-B for Device Operation | 50 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | UART | No | No | Mini-JTAG Debug Connector | Interal RX RTC | On-board Speaker | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-B for power | +5 Volt DC | 250 mA typ / 500 mA max | 78.74 (W) x 77.47 (H) x 13.72 (D) mm | 320 x 240 (QVGA) | 350 nits (typ) | 500 : 1 (typ) | 60/70¡ U/D | 70/70¡ L/R | Not Documented | 384 mW (typ) | In Production | $160.00 | Tianma |
| uEZGUI-1788-43WQR-BA | $125.00 | 4.3 inches | 2H | NXP LPC1788 | 120MHz | 96KB | 512KB | 8MB | NOR | up to 32MB | 8MB | up to 32MB | Not available | Internal 4K EEPROM | External 8KB EEPROM | SPI @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connector for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-AB for power | +5 Volt DC | 350 mA typ / 500mA max | 116.84 (W) x 72.14 (H) x 12.95 (D) mm | 480 x 272 (WQVGA) | 300 nits (typ) | 500 : 1 (typ) | 55/80 ¡ U/D | 80/80 ¡ L/R | 9 LEDs (9S x 1P) | 10K hrs (min) | In Production | $199.00 | Sharp |
| uEZGUI-4088-43WQN-BA | $164.00 | 4.3 inches | > 6 | NXP LPC4088 | 120MHz | 96KB | 512KB | 16MB | SPIFI (4 Bit serial) | up to 64MB | 8MB | up to 32MB | Not available | Internal 4K EEPROM | None | 4-Bit SD mode @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery, PMOD type 2A | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker and headphone jack | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-AB for power | +5 Volt DC | 600 mA typ / 750mA max (for Rev 2.0 high power displays) or 500 mA typ / 650mA max for Rev 1.X low power displays | 116.84 (W) x 72.14 (H) x 13.275 (D) mm | 480 x 272 (WQVGA) | 680 nits | 500 : 1 (typ) | 75/75¡ U/D for Rev 2.0, 70/50 for Rev 1.X | 75/75¡ L/R for Rev 2.0, 70/70 for Rev 1.X | 16 LEDs (8S x 2P) for Rev 2.0, 12 LEDs (6S x 2P) for Rev 1.X | 50K hrs (typ) | In Production | $235.00 | New Haven |
| uEZGUI-4088-43WQH-BA | $150.00 | 4.3 inches | > 3 | NXP LPC4088 | 120MHz | 96KB | 512KB | 16MB | SPIFI (4 Bit serial) | up to 64MB | 8MB | up to 32MB | Not available | Internal 4K EEPROM | None | 4-Bit SD mode @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery, PMOD type 2A | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker and headphone jack | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-AB for power | +5 Volt DC | 600 mA typ / 750mA max | 116.84 (W) x 72.14 (H) x 12.9 (D) mm | 480 x 272 (WQVGA) | 705 nits (typ) | 500 : 1 (typ) | 75/75¡ U/D | 75/75¡ L/R | 16 LEDs (8S x 2P) | 50K hrs (typ) | In Production | $220.00 | New Haven |
| uEZGUI-4088-43WQE-BA | $150.00 | 4.3 inches | N/A | NXP LPC4088 | 120MHz | 96KB | 512KB | 16MB | SPIFI (4 Bit serial) | up to 64MB | 8MB | up to 32MB | Not available | Internal 4K EEPROM | None | 4-Bit SD mode @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery, PMOD type 2A | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker and headphone jack | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-AB for power | +5 Volt DC | 600 mA typ / 750mA max | 116.84 (W) x 72.14 (H) x 11.7 (D) mm | 480 x 272 (WQVGA) | 850 nits (typ) | 500 : 1 (typ) | 75/75¡ U/D | 75/75¡ L/R | 16 LEDs (8S x 2P) | 50K hrs (typ) | In Production | $220.00 | New Haven |
| uEZGUI-4357-50WVN-BA | 5.0 inches | Projected Capacitive | NXP LPC4357 | 204MHz | 136KB | 1MB | 16MB | SPIFI (4 Bit serial) | up to 16MB | 16MB | up to 32MB | Not available | Internal 16K EEPROM | None | 4-Bit SD mode @ 50MHz (Preliminary) | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery, PMOD type 2A | 3 Axis | Yes | ARM Cortex-M Debug Connector | Internal RTC, Supercap backup | On-board Speaker and headphone jack | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-AB for power | +5 Volt DC | 650 mA typ / 800mA max | 120.65 (W) x 92.71 (H) x 13.60 (D) mm | 800 x 480 (WVGA) | 450 nits (typ) | 600 : 1 (typ) | 75/65¡ U/D | 75/75¡ L/R | 50K hrs (typ) | 1.152 W (typ) | New Haven | |||
| uEZGUI-1788-56VI-BA | $164.00 | 5.6 inches | 4-Wire Resistive | NXP LPC1788 | 120MHz | 96KB | 512KB | 8MB | NOR | up to 16MB | 8MB | up to 32MB | Not available | Internal 4K EEPROM | External 8KB EEPROM | SPI @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker | Optional | Optional | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-B for power (no USB communications) | +5 Volt DC | 650 mA typ / 850 mA max | 127 (W) x 115.32 (H) x 13.97 (D) mm | 640 x 480 (VGA) | 350 nits (typ) | 500 : 1 (typ) | 50/70¡ U/D | 70/70¡ L/R | 20K hrs (min) | 1900 mW (typ) | In Production | $270.00 | Intetronic |
| uEZGUI-1788-70WVT-BA | $177.00 | 7.0 inches | >3H | NXP LPC1788 | 120MHz | 96KB | 512KB | 8MB | NOR | 8MB to 16MB | 16MB | to 32MB | Available | Internal 4K EEPROM | External 8KB EEPROM | SPI @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery | 3 Axis | Yes | Mini-JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-B for power (no USB communications) | +5 Volt DC | 600mA typ / 1100mA max | 170.18 (W) x 132.08 (H) x 13.97 (D) mm | 800 x 480 (WVGA) | 280 nits (typ) | 500 : 1 (typ) | 70/60¡ U/D | 70/70¡ L/R | 24 LEDs (3S x 8P) | 20K hrs (min) | In Production | $260.00 | Tianma |
| uEZGUI-1788-70WVM-BA | $227.00 | 7.0 inches | >3H | NXP LPC1788 | 120MHz | 96KB | 512KB | 8MB | NOR | 8MB to 32MB | 16MB | to 32MB | Available | Internal 4K EEPROM | External 8KB EEPROM | 4-Bit SD mode @ 15MHz | USB Device Mini-AB for Host or Device Operation | 70 Fine Pitch I/O Connectors for External Expansion:Serial Ports, UART, I_C, SPI, USB Host/DeviceRMII interface for Ethernet 10/100 | ISP, UART, RTC External battery, PMOD type 2A | 3 Axis | Yes | Cortex-M 9-pin JTAG Debug Connector | Internal RTC, Supercap backup | On-board Speaker and headphone jack | No | No | -20¡ to 70¡ C | -30¡ to 80¡ C | USB Device Mini-B for power (no USB communications) | +5 Volt DC | 750 mA typ / 1250 mA max | 170.18 (W) x 132.08 (H) x 16.51 (D) mm | 800 x 480 (WVGA) | 450 nits (typ) | 1000 : 1 (typ) | 85¡ U/D | 85¡ L/R | 24 LEDs (3S x 8P) | 50K hrs (typ) | In Production | $320.00 | Microtips |
